DeLonghi DFS 903 Operations Instructions download pdf (Page 19)

Fig. 10

Fig. 11

Burners

They can be removed and washed only with

soapy water.

Detergents can be used but must not be

abrasive or corrosive.

Do not use abrasive sponges or pads.

Do not put in dishwasher.

After each cleaning, make sure that the burner-

caps, as well as the burners, have been well

wiped off and CORRECTLY POSITIONED.

It is essential to check that the burner flame

distributor F and the cap C has been correctly

positioned (see fig. 9) - failure to do so can

cause serious problems.

Check that the electrode “S” (fig. 9) is always

clean to ensure trouble-free sparking.

Note:

The electrode S must be very carefully

cleaned.

To avoid damage to the electric ignition

do not use it when the burners are not in

place.

Triple ring burner

The triple ring burner must be correctly positioned (see fig. 10); the burner rib must be

enter in their logement as shown by the arrow.

The burner correctly positioned must not rotate (fig. 11).

Then position the cap A and the ring B (fig. 11).

Fig. 9

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

No comments

DeLonghi DFS 903 Operations Instructions Page 19