DeLonghi DFS 903 Operations Instructions download pdf (Page 18)

Cleaning the hob

Spillage on the hob can usually be removed by a damp soapy cloth. More obstinate stains

can be removed by rubbing gently with a soapy scouring pad or mild household cleaner.

Important:

As a safety measure, before you start cleaning the cooker be sure to disconnect it from the

mains supply.

Do not use a steam cleaner because the moisture can get into the appliance thus

make it unsafe.

Care and maintenance

Gas taps

If a tap becomes stiff, do not force; contact your local COMET Service Centre.

Flexible tube

From time to time, check the flexible tube connecting the gas supply to the cooker.

It must be always in perfect condition; in case of damage arrange for it to be replaced by a

C.O.R.G.I. registered installer.

Cleaning oven parts after use

The oven interior and the chromium plated shelves can be cleaned by damp soapy cloth.

Obstinate stains can be removed with nylon scouring pads and gentle, non-abrasive, liquid

cleaner. Provided the oven is wiped over immediately after roasting, only the minimum of

cleaning should be necessary.

Stainless steel surfaces

The stainless steel front panels on this cooker (facia, oven door, drawer or storage

compartment) are protected by a finger-print proof lacquer. To avoid damaging this

lacquer, do not clean the stainless steel with abrasive cleaners or abrasive cloths or scouring

pads.

ONLY SOAP/WARM WATER MUST BE USED TO CLEAN THE STAINLESS STEEL SURFACES.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

No comments

DeLonghi DFS 903 Operations Instructions Page 18