DeLonghi Magnifica S Manual download pdf (Page 11)

The descale programme automatically performs a series

of rinses and pauses to remove the limescale.

It is normal for several minutes of inactivity to elapse

between rinses.

After about 30 minutes, the water tank is empty and the

and lights ash. Turn the steam dial clockwise as far as it

will go to the 0 position.

The appliance is now ready for rinsing through with clean

water.

7. Empty the container used to collect the descaler solution

and replace it empty under the cappuccino maker.

8. Remove the water tank, empty, rinse under running

water, ll with clean water and replace. The light

ashes.

9. Turn the steam dial anticlockwise to the I position (g. 5).

Hot water comes out of the spout.

10. When the water tank is completely empty, the light

ashes.

11. Turn the dial to the 0 position. The light goes

o.

Fill the water tank again and the machine is ready for use.

SETTING WATER HARDNESS

Descaling is necessary after a period of operation established

according to the water hardness set.

The machine is factory set for a hardness value of 4.

The machine can also be programmed according to the

hardness of the mains water in the various regions so that the

machine needs to be descaled less often.

Measuring water hardness

1. Remove the “TOTAL HARDNESS TEST” indicator paper

attached to this manual from its pack.

2. Immerse the paper completely in a glass of water for one

second.

3. Remove the paper from the water and shake lightly.

After about a minute, 1, 2, 3, or 4 red squares form,

depending on the hardness of the water. Each square

corresponds to one level.

Level 1

Level 2

Level3

Level 4

Set water hardness

1. Make sure the appliance is o (but connected to the

mains electricity supply and with the main switch in the I

position);

2. Press the button and hold it down for at least

6 seconds. The and lights come on

together;

3. Press the button (on the left of the dial) to set the

actual water hardness as measured by the indicator

paper.

Level Level Level Level

1 234

4. Press the button (on the right of the dial) to

conrm the selection.

The machine is now reprogrammed with the new water

hardness setting.

TECHNICAL SPECIFICATION

Voltage: 220-240 V~ 50/60 Hz max. 10A

Absorbed power: 1450W

Pressure: 15 bars

Water tank capacity: 1.8 litres max.

Size LxHxD: 238x340x430 mm

Cable length: 1.15 m

Weight: 9.1 kg

Coee beans container capacity: 250 g max.

The appliance complies with the following EC

directives:

• Stand-byDirectiveno.1275/2008;

• Low Voltage Directive 2006/95/EC and subsequent

amendments;

• EMC Directive 2004/108/EC and subsequent

amendments

• Materialsandaccessoriescomingintocontactwithfood

conform to EEC regulation 1935/2004.

DISPOSAL

Important information for correct disposal of the

product in accordance with EC Directive 2002/96/

EC.

At the end of its working life, the product must not

be disposed of as urban waste. It must be taken to

a special local authority dierentiated waste collection centre

or to a dealer providing this service. Disposing of a household

appliance separately avoids possible negative consequences

for the environment and health deriving from inappropriate

disposal and enables the constituent materials to be recovered

to obtain signicant savings in energy and resources.As a

reminder of the need to dispose of household appliances

separately, the product is marked with a crossed-out wheeled

dustbin.

1 2 ... 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

DeLonghi Magnifica S Manual Page 11

Comments to this Manuals

Related products and manuals for Coffee makers DeLonghi Magnifica S