DeLonghi Magnifica ESAM6600 User Manual Page 14

  • Download
  • Add to my manuals
  • Print
  • Page
    / 22
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 13
C ollection
13
NOTE 1: While preparing the cappuccino, frothed milk or coffee run off can be interrupted by pressing the
CAPPUCCINO button.
NOTE 2: If you run out of milk while delivering frothed milk, remove the container and refill it.Then put it back
in place and press the CAPPUCCINO button to request a cappuccino again.
NOTE 3: To ensure the milk frother is absolutely clean and hygienic, after making cappuccinos, clean the chan-
nels inside the milk container lid:
•Place a recipient under the milk spout;
•Press the CLEAN button on the milk container lid and hold down for at least 8 seconds (fig. 25).
The appliance displays:
CLEANING
After cleaning is complete, remove the milk container and place in the refrigerator. You should not leave
the milk outside the refrigerator for more than 15 minutes.
NOTE 4: To change the quantity of coffee or frothed milk delivered automatically into the cup, follow the
instructions in section 15.
13 PREPARING LATTE (MILK WITH COFFEE) OR FLAT WHITE
•Prepare the appliance as described to make cappuccino.
•Before attaching the milk container to the spout,place the pointer in position 2 if you want to make LATTE
(MILK WITH COFFEE) or in position 3 if you want to make FLAT WHITE (fig. 26). If the froth is not satisfac-
tory,move the pointer slightly until you obtain the required froth.
•Press the LATTE button (fig. 27).
The button lights up and the appliance displays the message:
latte CONTAINER POINTER IN POSition 2
or
•Press the FLAT WHITE button (fig. 28).The button lights up and the appliance displays the message:
flat white CONTAINER POINTER IN POSition 3
and after a few seconds, the frothed milk is run off from the milk spout into the cup below. (Run off stops
automatically).
14 PREPARING FROTHED MILK AND HOT MILK (WITHOUT COFFEE)
To obtain frothed milk only without coffee or hot milk only without coffee, turn the pointer on the lid to the
required position (1, 2 or 3) and then press the cappuccino, latte or flat white buttons twice (within two
seconds).
15 CHANGING THE QUANTITY OF COFFEE AND MILK FOR CAPPUCCINO/LATTE/FLAT
WHITE
The appliance is factory preset to automatically deliver the following quantities of coffee or milk: To change
these quantities, proceed as follows:
•Fill the container with milk up to the maximum level indicated on the container.
•Press the button corresponding to the process you want to modify (CAPPUCCINO/LATTE/FLAT WHITE)
for at least 8 seconds until the appliance emits a BEEP and displays:
MILK FOR... PROGRAM. QUANTITY
Then release the button. The appliance starts running off milk.
Once the required quantity of milk has been run off, press the button selected previously. Milk delivery
stops and the quantity is memorised. (The appliance emits a BEEP”).
•After a few seconds, the appliance runs off coffee into the cup and displays:
COFFEE FOR... PROGRAM. QUANTITY
Page view 13
1 ... 13 14 15 16 17 18 19 20 21 22

Comments to this Manuals

No comments