MAKING COFFEE
Selecting the coffee taste
The appliance is set by default to make coffee
with a standard taste.
You can also choose one of these tastes:
Extra-mild taste
Mild taste
Standard taste
Strong taste
Extra-strong taste
To change the taste, press the button
(fig. 7) repeatedly until the required taste is
displayed.
Selecting the quantity of coffee in the cup
The appliance is set by default to make a standard
quantity of coffee.
To select the quantity of coffee, turn the selection
knob until the light corresponding to the required
quantity of coffee comes on (fig. 8):
Selected coffee Quantity in cup (ml)
MY COFFEE
programmable
from 20 to 180
ESPRESSO
≃40
NORMAL
≃60
LONG
≃90
EXTRA LONG
≃120
Customising the “MY COFFEE” quantity
The appliance is set by default to automatically
deliver 30 ml of “my coffee”.
To modify these settings, proceed as follows:
1. Place a cup under the coffee spouts (fig. 9).
2. Turn the selection knob (B6) until the
light comes on.
3. Press the 1 cup button (fig. 10) until the
light starts flashing and the appliance
starts delivering coffee, then release the but-
ton.
4. As soon as the coffee in the cup reaches the
required level, press the 1 cup button
again.
The quantity of coffee in the cup has now been
programmed.
Adjusting the coffee mill
The coffee mill is preset in the factory to make
coffee correctly and should not require adjusting
initially. However, if after making the first few
coffees you find that the coffee is too thin and
not creamy enough or that delivery is too slow
(a drop at a time), this can be corrected by adju-
sting the grinding adjustment knob (fig. 11).
Please note!
The grinding adjustment knob must only be tur-
ned when the coffee mill is in operation.
If the coffee is delivered too
slowly or not at all, turn one
click clockwise towards
“7”.
For fuller bodied creamier
coffee, turn one click anti-
clockwise towards “1” (do
not turn more than one click at a time otherwise
the coffee could be delivered a drop at a time).
These adjustments will only be evident after at
least 2 cups of coffee have been delivered.
If this adjustment does not obtain the desired
result, turn the knob another click.
Tips for a hotter coffee
For a hotter coffee, before delivery you are re-
commended to rinse the appliance through, as
follows:
Danger of burns!
During rinsing, a little hot water comes out of the
coffee spouts and is collected in the drip tray un-
derneath. Avoid contact with splashes of water.
1. Press the P button to enter the menu;
2. Turn the selection knob until light comes
on;
3. Press the button to select the fun-
ction: OK light flashes;
4. Press the button to start the function
(or the button to exit); the light
flashes.
5. Once finished, the appliance is ready to make
coffee. .
grazie