DeLonghi ESAM 5400 User Manual download pdf (Page 10)

5. Press the button (ﬁg. 4). After a few

seconds, the appliance delivers hot water and

the light comes on.

The appliance ends the ﬁrst start up procedure

and goes off.

The coffee maker is now ready for normal use.

Please note:

• Whenusingtheapplianceforthersttime,

you need to make 4/5 cups of coffee and 4/5

cappuccinos before the appliance starts to

give satisfactory results.

TURNING THE APPLIANCE ON

Please note:

Before turning the appliance on, make sure the

main switch on the back of the appliance is in the

I position (ﬁg. 3).

Each time the appliance is turned on, it performs

an automatic preheat and rinse cycle which can-

not be interrupted.

The appliance is ready for use only after comple-

tion of this cycle.

Danger of burns!

During rinsing, a little hot water comes out of

the coffee spouts and is collected in the drip tray

underneath.

Avoid contact with splashes of water.

• To turn the appliance on, press the but-

ton (ﬁg. 5): The light ﬂashes while the

appliance is heating up and performing an

automatic rinse cycle. By circulating hot wa-

ter, the appliance heats both the boiler and

the internal circuits .

The appliance is at temperature when the

light goes off and the lights corresponding to the

selected coffee taste and quantity come on.

TURNING THE APPLIANCE OFF

Each time the appliance is turned off, it performs

an automatic rinse cycle which cannot be inter-

rupted.

Important!

To avoid damaging the appliance,always press

the button to switch off the appliance.

Danger of burns!

During rinsing, a little hot water ﬂows from the

coffee spouts. Avoid contact with splashes of

water.

To turn the appliance off, press the button

(ﬁg. 5). The appliance performs a rinse cycle,

then goes off.

Please note:

If the appliance is not used for an extended pe-

riod, place the main switch in the 0 position (ﬁg.

6).

Never place the main switch in the 0 position

while the appliance is on.

MENU SETTINGS

When you access the programming menu by pressing

the P button; the following menu settings are available:

Rinse, Decalciﬁcazione, Descale, Auto-off, Set tempe-

rature, Water hardness, Statistics, Default values.

Rinse

For instructions on rinsing, see “Tips for a hotter

coffee”, page 12.

Descaling

For instructions on descaling, see page 16.

Energy saving

Use this function to enable or disable energy sa-

ving mode. This mode is active by default (ECO

light on), reducing energy consumption while

the machine is on in compliance with current Eu-

ropean regulations.

1. Press the P button to enter the menu;

2. Turn the selection knob until the ECO light

comes on.

3. Press the button to activate, or

to deactivate, the energy saving fun-

ction.

4. When activated, press the button to

exit the menu.

Please note!

As the “ECO” function is deactivated, the cup

warming shelf is automatically activated.

Auto off (Stand by)

The appliance is set to turn off automatically if

not used for 2 hours.

The time can be changed so that the appliance

switches off after 15 or 30 minutes, or after 1,

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

Piersilvio 29 Sep 2024 | 19:42:31

grazie

DeLonghi ESAM 5400 User Manual Page 10

Comments to this Manuals

Related products and manuals for Coffee makers DeLonghi ESAM 5400