8
Please note:
Keep these instructions.
If the appliance is passed to other persons, they must also be
provided with these instructions.
DESCRIPTION
Description of the appliance
(page 3 - A )
A1. Beans container lid
A2. Top lid
A3. Grinding adjustment dial
A4. Beans container
A5. Pre-ground coee funnel lid with pressure lock
A6. Pre-ground coee funnel
A7. Main switch
A8. Socket for power cable connector
A9. Infuser
A10. Infuser door
A11. Cup warmer shelf
A12. Control panel
A13. Coee spout (adjustable height)
A14. Hot water and steam nozzle
A15. Condensate tray
A16. Water tank lid
A17. Water tank
A18. Water lter (some models only)
A19. Cup tray
A20. Drip tray water level indicator
A21. Drip tray
A22. Coee grounds container
Description of the control panel
(page 2 - B )
A number of buttons on the panel have a double function. This is
indicated in brackets in the description.
B1. button: turns the appliance on and o
B2. : button: to select the coee quantity
B3. MENU button to access the menu (When in the settings
MENU, it acts as the “ESC” button to exit from the selected
function and go back to the main menu).
B4. Display: guides the user in using the appliance.
B5.
button: to deliver hot water (When in the settings
menu, press to conrm the selection)
B6. button: to make 1 cup of coee with the settings
displayed
B7. aroma selection button: to select the coee
taste
B8. CAPPUCCINO button: to deliver a cappuccino
B9. LATTE button: to deliver a latte (When in the settings
menu, press to scroll backwards)
B10. FLAT WHITE button: to deliver a at white
B11. HOT MILK button: to deliver a cup of hot milk (When in
the settings menu, press to scroll forwards)
B12: button: to deliver steam
B13. button: to make 2 cups of coee with the
settings displayed
Description of the milk container
(page 2 - C )
D1. Froth adjustment and CLEAN dial
D2. Frothed milk spout (adjustable)
D3. Milk intake tube
D4. Milk container
Description of the accessories
(page 2 - D )
D1. Pre-ground coee measure
D2. Cleaning brush
A18. Water lter (certain models only)
D3. Cappuccino maker/hot water spout
D4. Power cable
D5. “Total Hardness Test” indicator paper
D6. Descaler
PRELIMINARY CHECKS
Checking the appliance
After removing the packaging, make sure the product is
complete and undamaged and that all accessories are present.
Do not use the appliance if it is visibly damaged.
Contact De’Longhi Customer Experience.
Installing the appliance
Important!
When installing the appliance, respect the following safety
warnings:
• The appliance gives o heat.
After positioning the appliance on the worktop, leave a
space of at least 3 cm between the surfaces of the appli-
ance and the side and rear walls and at least 15 cm above
the coee maker.
• Water penetrating the coee maker could cause damage.
Do not place the appliance near taps or sinks.
• Theappliancecouldbedamagedifthewateritcontains
freezes.
Do not install the appliance in a room where the
temperature could drop below freezing point.
• Arrangethepowercableinsuchawaythatitcannotbe
damaged by sharp edges or contact with hot surfaces
(e.g. electric hot plates).
Comments to this Manuals