DeLonghi ECAM 28.465.M Manual download pdf (Page 11)

• release the main switch at the side of the appliance (g.

2).

Important!

Never press the main switch while the appliance is on.

MENU SETTINGS

When you access the programming menu by pressing the

MENU/ESC button, the following menu items are available:

Rinsing

Use this function to deliver hot water from the spout to heat

the internal circuit and make the coee delivered hotter.

To enable the function, proceed as follows:

1. Press the MENU/ESC button to enter the menu;

2. Press the HOT MILK or LATTE button (g. 8) until “Rins-

ing” is displayed;

3. Press the button. The message “Conrm?” is dis-

played;

4. Press the (g. 3): after a few seconds, hot water

ows out of the spout, heating the internal circuit and ma-

king the coee delivered hotter.

Please note!

Press any button to stop hot water delivery at any time.

Descale

For instructions on descaling, see page 17.

Install lter

For instructions on how to install the lter, see the section

“Installing the lter (page 18).

Replacing the lter

For instructions on how to replace the lter, see the section

“Replacing the lter” (page 19).

Adjust time

To adjust the time on the display, proceed as follows:

1. Press the MENU/ESC button to enter the menu;

2. Press the HOT MILK or LATTE button (g. 8) until “Adjust

time” is displayed;

3. Press the button (g. 3);

4. Press the HOT MILK or LATTE button (g. 8) to change

the hours;

5. Press the button to conrm;

6. Press the HOT MILK or LATTE button (g. 8) to change

the minutes;

7. Press the button to conrm.

This sets the time. Press the MENU/ESC button to exit the

menu.

Auto-start

You can set the auto-start time in order to have the appliance

ready at a certain time (for example in the morning) so you can

make coee immediately.

Please note!

To enable this function, the time must already have been set

correctly.

To enable Auto-on, proceed as follows:

1. Press the MENU/ESC button to enter the menu;

2. Press the HOT MILK or LATTE button (g. 8) until “Au-

to-start” is displayed;

3. Press the button. “Enable?” is displayed;

4. Press the button to conrm;

5. Press the HOT MILK or LATTE button to choose the hours;

6. Press the button to conrm;

7. Press the HOT MILK or LATTE button (g. 8) to change

the minutes;

8. Press the button to conrm;

9. Press the MENU/ESC button to exit the menu.

Once the time has been conrmed, enabling of auto-start is in-

dicated by the symbol displayed alongside the time and

under the Auto-start item in the menu.

To disable the function:

1. Select auto-start from the menu;

2. Press the button. “Disable?” is displayed;

3. Press the button to conrm.

The symbol is no longer displayed.

Auto-O

The time can be changed so that the appliance switches o

after 15 or 30 minutes, or after 1, 2 or 3 hours.

To re-programme Auto-o, proceed as follows:

1. Press the MENU/ESC button to enter the menu;

2. Press the HOT MILK or LATTE button (g. 8) until “Au-

to-o” is displayed;

3. Press the button;

4. Press the HOT MILK or LATTE button (g. 8) until the de-

sired operation time is displayed (15 or 30 minutes, or 1, 2

or 3 hours);

5. Press the button to conrm;

6. Press the MENU/ESC button to exit the menu.

Auto-o is programmed.

Cup warmer

This function enables or disables the cup warmer.

Proceed as follows:

1. Press the MENU/ESC button to enter the menu;

2. Press the HOT MILK or LATTE button (g. 8) until “Cup

warmer” appears on the display;

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Comments to this Manuals

No comments

DeLonghi ECAM 28.465.M Manual Page 11

Comments to this Manuals

Related products and manuals for Coffee makers DeLonghi ECAM 28.465.M