DeLonghi PAC GSR/MU Specifications download pdf (Page 11)

HOW TO START UP THE CONDITIONER

Plug the appliance into the wall

socket.

The ON/OFF signal lamp (1) comes

on and stays on for as long as the

appliance is connected to the socket.

Select either Programmed or Non-pro-

grammed mode (see previous page).

Select the fan speed required pressing

“Fan speed” key D.

Key C (Ventilation/

Conditioning

) must

be released

Turn the thermostat to

Max. cold.

Press key A

(

ON/OFF)

Signal lamp 5

(Conditioning) and

either 6 or 7 (

Min. or

Max. fan speed

) will

come on.

The appliance comes on.

If not, refer to pag. 14.

To switch off the appliance, press key A

(ON/OFF main switch).

AIR-CONDITIONING

N.B: For technical reasons, the temperature is not shown in degrees, but is represented by two lines

which vary in thickness according to the temperature. It is advisable to begin by turning the

thermostat to the maximum setting (thick green line = maximum cooling). When the room tem-

perature is comfortable, turn the thermostat slowly away from the maximum heating or cooling

position until the air-conditioner switches off. Leave the thermostat in this position. The air-con-

ditioner is now programmed to maintain the exact temperature at all Times.

This appliance is fitted with a special safety circuit. When the compressor switches off, this cir-

cuit prevents it from switching on again for at least 3 minutes.

N.B: the “TIMER ON” signal lamp will only come on with “Programmed” mode.

VENTILATION

Key C (Ventilation/

Conditioning

) must

be pressed

GB 18-01-2001 12:12 Pagina 11

1 2 ... 6 7 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments

DeLonghi PAC GSR/MU Specifications Page 11

Comments to this Manuals

Related products and manuals for Split-system air conditioners DeLonghi PAC GSR/MU