How to dehumidify
1) Plug the appliance into a mains socket.The power light comes on to show the appliance is
connected to the mains.
2) Check that the “tank full/no tank”indicator light is off.
3) Turn the humidistat to the “CONTINUOUS” position and the mode selector to the
“DEHUMIDIFICATION” position. The dehumidification pause light comes on during the first
three minutes (safety device),followed by the dehumidification light.
4) Select maximum or minimum fan speed (the relevant light comes on).
When the humidity in the room has reached the required level,slowly turn the humidistat knob
anticlockwise until the dehumidifying light goes out. The dehumidifier will then keep the
humidity in the room at the selected level automatically.
Note: When dehumidifying,the appliance not only dehumidifies but also slightly warms the
air (1-2°C hotter than room temperature)
How to ventilate
1) Plug the appliance into a mains socket.
2) Turn the mode selector to the “VENTILATION”position.
3) Select the Select maximum or minimum fan speed.The corresponding light comes on.
How to heat
1) Plug the appliance into a mains socket.
2) Turn the thermostat knob to position 5.
3) Turn the mode selector to the “HEATING”position.The heating light comes on and the
appliance starts up.
4) Select the economy (1 = 800 W) or maximum (2 = 1600 W) heating level on the speed/heat
selection button (the corresponding light comes on).
When the temperature in the room has reached the required level,slowly turn the thermostat
knob anticlockwise until the heating light goes out.
The thermostat will then keep the temperature in the room at the selected level automatically.
Combined mode, (dehumidifying + heating) (see info on pag.18)
1) Plug the appliance into a mains socket.
2) Check that the “tank full/no tank” warning light is off.
3) Turn the humidistat knob to the “CONTINUOUS”position.
4) Turn the thermostat to desired position (pos.1-5).
5) Rotate the mode selector to the “COMBI”position.If the set temperature is higher than the room
temperature,the ( )light comes on together with the dehumidification pause light ( ) for
the first three minutes (safety device),followed by the dehumidification light ( ).
6) Select maximum or minimum fan speed (and consequently the electrical power).In this mode,
the electrical power will be 1,990 W or 1.190 W.
7) When you have reached the desired humidity,slowly turn back the humidistat knob anticlockwise
until the dehumidifying light and the heating light if still on,go out.The dehumidifier will then keep
the humidity at the set level.
Note: The appliance only stops completely when the level of humidity set is reached. If the tank
is full, the tankfull warning light comes on and the power indicator light turns off . The
refrigerant circuit stops.
8
Selecting operating modes
(4 pages)
(164 pages)
(66 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals