
19
MILL
The grinding is too ne and the coee is deli-
vered too slowly or not at all.
R
epeat coee delivery and turn the grinding
adjustment dial (g. 8) one click clockwise to-
wards “7” while the coee mill is in operation.
If after making at least 2 coees delivery is
still too slow, repeat the correction procedure,
turning the grinding adjustment dial another
click until delivery is correct (see the section
“Adjusting the coee mill” on page 11).
If the problem persists, turn the steam dial to
the I position and let some water run from the
cappuccino maker.
The “pre-ground coee” function has been se-
lected without placing any pre-ground coee
in the funnel.
Place pre-ground coee in the funnel or dese-
lect the “pre-ground” function.
DESCALE The machine must be descaled. The descaling procedure described in the sec-
tion “Descaling” needs to be performed as soon
as possible (page 16).
Too much coee has been used. Select a milder taste or reduce the quantity of
pre-ground coee.
The coee beans have run out. Fill the beans container.
The pre-ground coee funnel is clogged. Empty the funnel with the help of a brush,
as described in the section “Cleaning the pre-
ground coee funnel” (page 15).
The infuser has not been replaced after
cleaning.
Insert the infuser as described in the para-
graph “Cleaning the infuser” (page 15).
The tank is not correctly in place. Insert the tank correctly and press as far as it
will go.
The inside of the appliance is very dirty. Clean the inside of the appliance thoroughly,
as described in the section “Cleaning” (page
14). If the message is still displayed after
cleaning, contact customer services.
REPLACE FILTER The water softener lter is exhausted. Replace the lter or remove it as described in
the section “Water softener lter” (page 17).
Milk has been delivered recently and the tubes
inside the milk container must be cleaned.
The hot water spout is not inserted or is inser-
ted incorrectly.
Insert the water spout (D3) as far as it will go.
WATER CIRCUIT EMPTY FILL
WATER CIRCUIT
alternating with...
The water circuit is empty.
ows out normally.
I
The milk container is not inserted correctly.
Insert the milk container (g. 13) as far as it
will go.
Need this
good