DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
Press CLEAN button
Milk has been delivered recently and the
tubes inside the milk container must be
cleaned.
pressed until the progress bar which
appears on the display together with the
message “Cleaning...” is complete.
INSERT WATER SPOUT
inserted incorrectly.
correctly.
go.
TROUBLESHOOTING
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.
PROBLEM POSSIBLE CAUSE REMEDY
The coffee is not hot
water (N.B. you can use the hot water
function).
2/3 minutes have elapsed since the last
coffee was made.
infuser by pressing the button .
temperature.
The coffee is thin or
not creamy enough.
click anticlockwise towards “1” while
the coffee mill is in operation (fig. 10).
Continue one click at a time until coffee
delivery is satisfactory. The effect is only
visible after delivering 2 coffees (see the
section: “Adjusting the coffee mill” on
page 13).
coffee makers
The coffee is delivered
too slowly or a drop at
a time.
one click clockwise towards “7” while
the coffee mill is in operation (fig. 10).
Continue one click at a time until coffee
delivery is satisfactory. The effect is only
visible after delivering two coffees. (see
the section “Adjusting the coffee mill” on
page 13).
Coffee does not come
out of one of the
spouts.
26B).
The milk does not
come out of the milk
spout.
in the section “Cleaning the milk
container”.
Comments to this Manuals