DeLonghi CERAMIC FAN HEATER User Manual download pdf (Page 2)

Description/Use

DESCRIPTION

(see g. 1)

A ON/STAND-BY button

B +/- adjustment buttons

C MODE button (selects the operating mode)

D “ECO plus” button

E Timer button

F Swing button

G Remote control receiver

H Indicator light

I Air intake grille

J Filter

USE

Installation

- The appliance can be used on any horizontal surface.

Do not overload the electrical circuit. Avoid using the

same socket for other appliances.

Electrical connection

Before plugging the appliance into the mains socket, check

that the mains power supply corresponds to the value

indicated on the rating plate and that the mains power

supply is adequate for the load.

- THIS APPLIANCE COMPLIES WITH DIRECTIVE 2004/108/EEC

ON RADIO INTERFERENCE SUPPRESSION.

Mounting the base

- Fit the two parts of the base together, matching the

guide pins on the front with the recesses on the back

and snapping the two clips into place (g. A and g. B).

- Turn the appliance upside down and x the base to the

body with the 6 screws supplied (g. C).

Operation and use

1. Plug into the mains socket.

2. The appliance emits a beep. The indicator light (H) comes

on and remains lit while the appliance is powered.

3. The appliance switches to stand-by. A dot ashing on

the display means the tip over device has been activated.

See paragraph: “Safety functions”.

Press the ON/STAND-BY (A) to turn the appliance on. It

begins heating the room according to the current settings.

5. Press the MODE button (C) to select one of the following

operating modes:

Fan

Freeze prevention

Heating 1

Heating 2

Heating 3

5.1 Fan

In this mode, only the fan operates and the appliance does

not heat the room.

5.2 Freeze prevention

In this mode, the appliance keeps the room at a temperature

of 7°C to avoid freezing.

5.3 Heating 1, 2 and Heating 3

In this mode, the desired temperature can be selected by

pressing the adjustment buttons + and – ( B ):

- Heating 1

The appliance operates at low power, reducing noise

levels and energy consumption to a minimum.

- Heating 2

The appliance operates at medium power.

- Heating 3

The appliance operates at high power to heat the room

rapidly.

6. “ECO plus” function

The “ECO plus” function is available in Heating 1, 2 and 3

modes only.

To activate the function, press the “ECO plus” button (D).

When this function is active the appliance automatically sets

the most appropriate power level to guarantee optimum

comfort while reducing energy consumption.

While the “ECO plus” function is active, the appliance may

switch automatically to a lower heating power than the one

displayed. This may happen a number of times in an hour.

7. To distribute the air ow over a wider surface, press the

swing button (F) . The appliance starts swinging to

the right and left. To stop the appliance in the desired

position, simply press the swing button (F) again.

8. To turn the appliance o, press the ON/STAND-BY button

(A). The display may visualize a countdown for about 6

seconds.

Please note: Room temperature can be displayed in either °C

or °F. To change the unit of measurement for the temperature,

press the + button for a few seconds, then release.

Digital 24 h timer

This function can be activated from any operating mode.

Auto-start: with the appliance in STAND-BY, press the timer

button (E) . The symbol is displayed together with

the time remaining before the appliance comes on. To adjust

For service questions, contact DeLonghi at 1-800-322-3848.

For sales inquiries, call Sylvane at 1-800-934-9194.

1 2 3

Comments to this Manuals

No comments

DeLonghi CERAMIC FAN HEATER User Manual Page 2

Comments to this Manuals

Related products and manuals for Space heaters DeLonghi CERAMIC FAN HEATER