DeLonghi EC610 Instruction Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 6
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
PRODUCING HOT WATER
1.Turn on the coffee unit by pressing the ON/OFF
switch (fig. 3). Wait until the ‘OK’ pilot light comes
on (fig. 5).
2.Position a container under the cappuccino maker.
3.Press the coffee delivery switch and at the same time
turn the steam knob in an anti-clockwise direction;
hot water will come out from the steam tube.
4.To stop the flow of hot water, turn the steam knob in
a clockwise direction and press the coffee delivery
switch.
CLEANING AND MAINTENANCE
Before carrying out any cleaning operations of the
exterior parts, switch the machine off, remove the plug
from the socket and leave the machine to cool.
CLEANING THE FILTER HOLDER FOR GROUND
COFFEE
About every 300 coffees, clean the filter holder for
ground coffee as follows:
Remove the filter with the frother;
Clean the inside of the filter holder. Never wash in a
dishwasher.
Unscrew the cap of the frother (fig. 22) by rotating in
the direction indicated by the arrow on the cap.
Remove the frother from the container by pushing it
from the cap end.
•Remove the gasket.
Rinse all components and clean the metal filter
thoroughly in hot water using a brush (fig. 23). Make
sure the holes in the metal filter are not blocked. If
necessary, clean with a pin (see fig. 24).
Replace the filter and gasket on the plastic disk as
shown in figure 25. Make sure to insert the pin on
the plastic disk into the hole in the gasket indicated
by the arrow in fig. 25.
Replace the assembly into the steel filter container
(fig. 26), making sure the pin is inserted into the hole
in the support (see arrow in fig. 26).
Finally, screw on the cap.
Failure to clean as described above invalidates the
guarantee.
CLEANING THE FILTER HOLDER FOR PODS (IF
SUPPLIED)
About every 300 coffees, clean the filter holder for
pods as follows:
Push the filter holder button, remove the filter (fig. 27)
and the frother if fitted. Clean the inside of the filter
holder. Never wash in a dishwasher.
Clean the filter thoroughly in hot water using a
brush. Make sure the holes in the metal filter are not
blocked. If necessary, clean with a pin (see fig. 23).
Replace the filter.
Failure to clean as described above invalidates the
guarantee.
CLEANING THE ESPRESSO BOILER OUTLET
At least twice a year, the espresso boiler outlet must be
cleaned as follows:
check that the coffee machine is not warm and the
plug is detached from the mains;
using a screwdriver, unscrew the screw that holds the
outlet of the espresso boiler (fig. 28);
clean the boiler with a damp cloth (fig. 14);
clean the outlet thoroughly in hot water using a
brush. Make sure the holes are not blocked. If
necessary, clean with a pin (fig. 24).
rinse the outlet under the tap, still scrubbing it;
replace the outlet of the espresso boiler, making sure
the gasket is correctly repositioned.
Failure to clean as described above invalidates the
guarantee.
OTHER CLEANING OPERATIONS
1.Do not use solvents or detergents in cleaning the
coffee maker. Use a soft, damp cloth.
2.Remove the drip-trays, empty them and wash them
periodically
ATTENTION: during cleaning, never immerse the
unit in water – it is an electrical appliance.
DESCALING
It is advisable to clean the calcium from the machine
every 300 cups of coffee. It is recommended that
specific (store-bought) products for descaling of
espresso coffee machines be used. If such products are
not available, it is possible to proceed as follows:
1.Fill the tank with water using 1 liter of water;
2.Dissolve 2 spoonfuls (about 30 grams) of citric acid
in the water (available from chemists);
3.Press the ON/OFF switch and wait that the OK pilot
lamp switches on.
4.Check that the filter holder is not attached and place
a container under the outlet of the machine;
5.Press the coffee delivery switch, let the water flows
for half water tank and turn the steam lever to let
some water to flow out from the steam tube. Then
press the coffee delivery switch to interrupt.
6.Allow the solution to act for about 15 minutes, then
start up the flow again until the tank is completely
empty;
7.To eliminate the remains of the solution and the
calcium, rinse the tank well, fill it with clean water
and replace. press the coffee delivery switch to
15
GB OK 16-12-2002 11:21 Pagina 15
Page view 3
1 2 3 4 5 6

Comments to this Manuals

No comments